Fan-Jet Patterns A-D

Spray Trajectories
			Full Circle;alternating HIGH /low trajectories		Wide gap on each side ("butterfly"); HIGH trajectory	Butterfly pattern;Standard trajectory	Wrap-around; Standard trajectory	Modified butterfly with narrow gaps; flat trajectory
			Approx. Diameter*		Approx. Diameter*	Approx. Diameter*	Approx. Diameter*	Approx. Diameter**
Nozzle Size	Pressure (PSI)	Flow (GPH)	High Stream	Low Stream	Approx. Diameter*	Approx. Diameter*	Approx. Diameter*	Approx. Diameter**
30 (Black)	10	4.4	10	9	12	12	10	9
	15	5.2	12	10	14	16	11	10
	20	6.0	14	10	16	17	12	11
	25	6.7	14	11	17	18	13	12
	30	7.4	15	11	18	20	13	13
35 (Orange)	10	5.9	14	10	15	14	13	10
	15	7.3	16	12	17	17	15	11
	20	8.4	17	13	18	18	16	12
	25	9.4	18	14	19	20	17	13
	30	10.3	19	15	20	21	18	14
40 (Blue)	10	7.5	15	11	16	17	15	11
	15	9.3	17	13	18	18	17	12
	20	10.7	19	15	20	21	19	13
	25	12.0	21	17	22	22	20	14
	30	13.1	22	18	24	24	21	15
45 (Violet)	10	10.0	17	13	17	18	18	11
	15	12.2	20	15	19	20	20	12
	20	14.1	22	17	21	22	22	14
	25	15.8	24	19	23	24	24	15
	30	17.3	26	21	25	26	25	16
50 (Green)	10	11.8	20	14	18	19	19	12
	15	14.4	23	17	20	21	21	13
	20	16.7	25	19	22	24	22	15
	25	18.6	27	21	24	26	26	16
	30	20.4	29	23	26	28	28	17
55 (Yellow)	10	13.7	21	15	19	21	22	12
	15	17.8	25	18	22	25	24	14
	20	20.5	27	20	26	27	27	16
	25	22.9	29	22	28	28	30	18
	30	25.1	31	24	30	29	32	19
60 (Red)	10	17.0	22	16	21	22	24	13
	15	20.8	26	19	25	25	26	15
	20	24.0	28	22	28	28	29	17
	25	26.8	30	24	30	30	32	-
	30	29.4	32	27	33	31	34	-

Performance Notes

*Pattern dimension data shown in feet,with 6" riser height.

**Pattern dimension data shown in feet,with 18" spray head height. These patterns are designed for inverted operation, suspended from an overhead supply line.

Combinations shaded in gray (data in italics) not recommended. Flow rate may be too high for accurate wetting pattern.

Recommended filtration: 150 mesh for 30-45 nozzles; 100 mesh for 50-60 nozzles.
Filtration recommendations for Bowsmith Fan-Jets are intended as a guideline only and are not a guarantee of product performance. Clogging or excessive wear may result from poor water quality or sources with high silt or organic content.

Chemicals intended for use with this product should first be tested for compatibility. Consult your irrigation dealer to ensure appropriate system design for these conditions.

Flows of complete Fan-Jet sprinkler assemblies may vary; please consult factory. We cannot guarantee flows of these heads when used with components not manufactured by Bowsmith.